MIG MAG welder 225A, MMA electrode 170A, IGBT, for 1kg/5kg wire reel | MIG225A

SKU: M2225B
GTIN: 4251210406366
Category: MIG MAG
Brands: VECTOR WELDING

MIG MAG welder 225A, MMA electrode 170A, IGBT, for 1kg/5kg wire reel | MIG225A

VECTOR WELDING MIG/MAG welding unit MIG 225A

MIG/MAG 30-225A

2 cycle/ 4 cycle

MMA/electrode 30-170A

IGBT

suitable: wire rolls 1kg (D100) & 5kg (D200) - NOT included in delivery

335,29 €

excl. 19% VAT , plus (Standard)

Manufacturers recommended retail price: 549,00 €

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

pcs.

article number: M2225B

WELDING EQUIPMENT MIG 225A

The MIG 225A from Vector Welding is a MIG/MAG welding equipment with 30-225A in MIG/MAG mode, 30-170A in MMA mode, as well as 10-200A in TIG mode (optional).

The MIG/MAG welding process with its automaticWire feed is suitable for many welding applications, even when working in hard-to-reach areas.

MIG 225A PROPERTIES & ADVANTAGES:

MIG/MAG: welding with automatic wire feed. For MIG welding argon (rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as shielding gas and is mainly used for simple and low-alloy steelSteel used like mild steel.
Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range. .
In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
Inductance: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate at which the current rises, so that the weld seam quality and precision is improved.
2 cycles/4 cycles (MIG/MAG and TIG)
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
hot start: every time the welding device is restarted, overcurrent is provided and thus supports the ignition of the arcsupported.
Arc Force: Melted material transfers more easily to the workpiece. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
DC TIG Welding ( optional: only possible with additional hose package and cables): Welding of almost all metals
Lift Arc: The ZIgnition takes place on contact with the workpiece, then the torch can be lifted and welding starts with the selected parameters.
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents
overheating protection

MIG 225A FEATURES:

MIG 225A TECHNICAL DETAILS:

setting range welding current (MIG/MAG mode)	30 - 255 A
setting range welding current (MMA/STICK mode)	30 - 170 A
setting range welding current (TIG mode)	10 - 200 A
switch-onvalign="top">Cycle time (ED) MIG/MAG 40°C	225 A at 25V 35%
Cycle time (ED) MMA/STICK 40°C	170 A at 26.8V 35%
Cycle time (ED) TIG 40°C	200 A at 18V 35%
Mains voltage	1 x 230 Volt
Mains frequency	50 - 60 Hz
Protection class	IP23
Dimensions in mm (L x W x H)	391 x 153 x 282
Weight in kg	8
Standards	EN60974-1 / IEC60974-1
Wire diameter in mm	0.6/0.8

1. On/Off	4. welding mode	7. 2 cycle/ 4 cycle
2. superheat indicator	5. display indicator display	8. wire thickness selection
3. parameter setting	6. ampere/inductance/burn-back/volt

:	Basic Series
Shipping weight:	11,80 kg
Item weight:	10,60 kg

MIG 225A TECHNICAL DETAILS:

setting range welding current (MIG/MAG mode)	30 - 255 A
setting range welding current (MMA/STICK mode)	30 - 170 A
setting range welding current (TIG mode)	10 - 200 A
duty cycle (ED) MIG/MAG 40°C	225 A at 25V 35%
duty cycle (ED) MMA/STICK 40°C	170 A at 26, 8V 35%
switch-on time (ED) TIG 40°C	200 A at 18V 35%
mains voltage	1 x 230 Volt
mains frequency	50 - 60 Hz
Protection class	IP23
Dimensions in mm (L x W x H)	391 x 153 x 282
weight in kg	8
standards	EN60974- 1 / IEC60974-1
wire diameter in mm	0, 6/0.8